P24F4 – BMW DTC

BMW DTC P24F4 – NOx Sensor Delayed Response – High to Low Bank 1 Sensor 1

DTC P24F4 meaning on BMW

DTC P24F4 on a BMW indicates a delayed response from the NOx (nitrogen oxide) sensor located in Bank 1 Sensor 1. This means that the sensor is taking longer than expected to transition from a high to low voltage signal, which can affect the vehicle’s emissions control system.

BMW DTC P24F4 symptoms

Symptoms of DTC P24F4 on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Increased fuel consumption
• Possible emissions-related issues

BMW DTC P24F4 causes

The delayed response from the NOx sensor in Bank 1 Sensor 1 leading to DTC P24F4 on a BMW can be caused by various factors, including:

• Faulty NOx sensor
• Wiring or connector issues
• Exhaust system leaks
• Software or calibration issues

BMW DTC P24F4 seriousness

DTC P24F4 should not be ignored as it can lead to increased emissions, reduced fuel efficiency, and potential damage to the vehicle’s catalytic converter and other emissions control components. It is important to address this issue promptly to ensure proper vehicle operation and compliance with emissions regulations.

How to diagnose DTC P24F4 on BMW

To diagnose DTC P24F4 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the NOx sensor in Bank 1 Sensor 1 for any physical damage or contamination
3. Check the wiring and connectors for any signs of damage or corrosion
4. Perform a system test to monitor the sensor’s response time and voltage transitions

How to fix DTC P24F4 on BMW

Fixing DTC P24F4 on a BMW may involve the following steps:

1. Replace the NOx sensor in Bank 1 Sensor 1 if it is found to be faulty
2. Repair or replace any damaged wiring or connectors
3. Address any exhaust system leaks that may be affecting sensor performance
4. Update software or perform calibration adjustments as needed

How to erase DTC P24F4 on BMW

After addressing the underlying issue causing DTC P24F4 on a BMW, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the vehicle’s onboard computer to monitor the system for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.