P2528 – BMW DTC

BMW DTC P2528 – Vacuum Reservoir Pressure Sensor Circuit High

DTC P2528 meaning on BMW

DTC P2528 on a BMW indicates a high voltage condition in the vacuum reservoir pressure sensor circuit. This means that the signal voltage from the sensor to the engine control module (ECM) is higher than the specified range, suggesting a potential issue with the sensor or its wiring.

BMW DTC P2528 symptoms

Symptoms of DTC P2528 in a BMW may include:

• Check Engine Light (MIL) illuminated
• Reduced engine performance
• Increased fuel consumption
• Possible rough idling or stalling

BMW DTC P2528 causes

Common causes of DTC P2528 in a BMW include:

• Malfunctioning vacuum reservoir pressure sensor
• Corroded or damaged wiring/connectors in the sensor circuit
• Vacuum leaks in the system
• Issues with the ECM

BMW DTC P2528 seriousness

While DTC P2528 may not cause immediate drivability issues, it can lead to reduced engine performance and potentially affect fuel efficiency. Ignoring this fault code may result in further damage to engine components over time.

How to diagnose DTC P2528 on BMW

To diagnose DTC P2528 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the vacuum reservoir pressure sensor and its wiring for any visible damage
3. Check for vacuum leaks in the system
4. Perform a voltage test on the sensor to verify its operation
5. Check the ECM for any related fault codes

How to fix DTC P2528 on BMW

To fix DTC P2528 on a BMW, you can try the following:

1. Replace the vacuum reservoir pressure sensor if faulty
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Address any vacuum leaks in the system
4. If necessary, reprogram or replace the ECM

How to erase DTC P2528 on BMW

To erase DTC P2528 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue, you can reset the code and monitor the system for any reoccurrence.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.