P253C – BMW DTC

BMW DTC P253C – PTO Sense Circuit Low

DTC P253C meaning on BMW

DTC P253C on a BMW refers to the Power Take-Off (PTO) Sense Circuit Low. This diagnostic trouble code indicates that the signal voltage from the PTO sensor circuit is below the expected range, potentially causing issues with the PTO system’s operation.

BMW DTC P253C symptoms

Symptoms of DTC P253C on a BMW may include:

• Malfunction indicator lamp (MIL) illuminated on the dashboard
• Possible loss of power or performance
• PTO system not engaging properly

BMW DTC P253C causes

Common causes of DTC P253C on a BMW include:

• Faulty PTO sensor
• Wiring issues in the PTO sensor circuit
• Corrosion or poor connections in the sensor circuit

BMW DTC P253C seriousness

While DTC P253C may not always result in immediate drivability issues, it is important to address this code promptly to ensure proper operation of the PTO system and prevent potential damage to other components.

How to diagnose DTC P253C on BMW

To diagnose DTC P253C on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and verify the presence of DTC P253C.
2. Inspect the PTO sensor and its wiring for any visible damage or corrosion.
3. Test the sensor’s voltage output using a multimeter to determine if it falls within the specified range.

How to fix DTC P253C on BMW

To fix DTC P253C on a BMW, you can try the following solutions:

1. Replace the faulty PTO sensor if it is determined to be the cause of the low circuit voltage.
2. Repair any damaged wiring or connections in the PTO sensor circuit.
3. Clear the fault codes using a diagnostic scanner after the repairs have been made.

How to erase DTC P253C on BMW

To erase DTC P253C on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s onboard computer system.
2. Select the option to clear fault codes or reset the system.
3. Confirm the deletion of the DTC P253C code and ensure that the MIL light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.