P2543 – BMW DTC

BMW DTC P2543 – Low Pressure Fuel System Sensor Circuit Intermittent

DTC P2543 meaning on BMW

DTC P2543 on a BMW indicates a fault with the Low Pressure Fuel System Sensor Circuit. This diagnostic trouble code is triggered when the Engine Control Module (ECM) detects an intermittent issue in the circuit responsible for monitoring the low-pressure fuel system.

BMW DTC P2543 symptoms

Symptoms of DTC P2543 on a BMW may include:

• Check Engine Light illuminated
• Engine running rough or misfiring
• Reduced engine performance
• Difficulty starting the engine

BMW DTC P2543 causes

The common causes of DTC P2543 on a BMW include:

• Faulty low-pressure fuel sensor
• Wiring or connector issues in the sensor circuit
• Intermittent electrical connection problems
• ECM software or hardware issues

BMW DTC P2543 seriousness

While DTC P2543 may not always result in immediate drivability issues, it is important to address this fault promptly. Ignoring this fault can lead to poor engine performance, reduced fuel efficiency, and potential long-term damage to the engine components.

How to diagnose DTC P2543 on BMW

To diagnose DTC P2543 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the low-pressure fuel sensor and its wiring for any visible damage
3. Check the sensor’s resistance and voltage readings according to manufacturer specifications
4. Perform a thorough inspection of the sensor circuit for loose connections or corrosion
5. Test the ECM for any software updates or hardware malfunctions

How to fix DTC P2543 on BMW

To fix DTC P2543 on a BMW, the following steps may be taken:

1. Replace the faulty low-pressure fuel sensor if it is found to be defective
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clean and secure all electrical connections related to the sensor
4. Reset the ECM and clear the fault code after completing the repairs

How to erase DTC P2543 on BMW

To erase DTC P2543 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After completing the necessary repairs and ensuring that the issue has been resolved, the fault code can be erased to turn off the Check Engine Light and reset the system for proper operation.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.