P2544 – BMW DTC

BMW DTC P2544 – Torque Management Request Input Signal ‘A’

DTC P2544 meaning on BMW

The Diagnostic Trouble Code (DTC) P2544 for BMW refers to the Torque Management Request Input Signal ‘A’. This code indicates that there is a malfunction in the signal input related to torque management within the vehicle’s engine control module (ECM).

BMW DTC P2544 symptoms

Symptoms of DTC P2544 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power loss
• Inconsistent acceleration or response from the throttle

BMW DTC P2544 causes

Common causes of DTC P2544 on a BMW can include:

• Defective torque management sensor
• Wiring or connection issues in the torque management circuit
• Faulty engine control module (ECM)

BMW DTC P2544 seriousness

The seriousness of DTC P2544 on a BMW lies in the potential impact on the vehicle’s performance and drivability. Ignoring this code can lead to further engine issues and potentially unsafe driving conditions. It is recommended to address this code promptly to prevent any long-term damage.

How to diagnose DTC P2544 on BMW

To diagnose DTC P2544 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the torque management sensor and its wiring for any visible damage or corrosion.
3. Check the connections between the sensor and the ECM for proper continuity.
4. If necessary, perform a live data scan to monitor the torque management signal while the vehicle is running.

How to fix DTC P2544 on BMW

To fix DTC P2544 on a BMW, consider the following steps:

1. Replace the faulty torque management sensor if it is determined to be the cause of the issue.
2. Repair any damaged wiring or connections in the torque management circuit.
3. If the ECM is found to be faulty, it may need to be reprogrammed or replaced.

How to erase DTC P2544 on BMW

To erase DTC P2544 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM.
2. After making the necessary repairs, reset the ECM by disconnecting the battery for a few minutes.
3. Reconnect the battery and start the vehicle to ensure the code has been successfully cleared.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.