P2551 – BMW DTC

BMW DTC P2551 – Torque Management Request Input Signal ‘B’ High

DTC P2551 meaning on BMW

The Diagnostic Trouble Code (DTC) P2551 for BMW refers to the Torque Management Request Input Signal ‘B’ High. This code indicates that the engine control module (ECM) has detected a high voltage signal from the torque management request input circuit ‘B’. The ECM uses this signal to control torque management strategies within the vehicle’s powertrain system.

BMW DTC P2551 symptoms

Symptoms of the BMW DTC P2551 may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power output
• Transmission shifting issues
• Vehicle going into limp mode

BMW DTC P2551 causes

Common causes of the BMW DTC P2551 may include:

• Faulty torque management request input sensor
• Wiring or connector issues in the torque management request input circuit
• ECM software or hardware problems

BMW DTC P2551 seriousness

The DTC P2551 on a BMW should not be ignored as it can lead to drivability issues and potential damage to the vehicle’s powertrain components. It is recommended to address this code promptly to prevent further complications.

How to diagnose DTC P2551 on BMW

To diagnose the DTC P2551 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
2. Inspect the torque management request input sensor and its wiring for any visible damage
3. Check the voltage signal from the sensor using a multimeter
4. Perform a thorough inspection of the ECM and related components

How to fix DTC P2551 on BMW

To fix the DTC P2551 on a BMW, you may need to:

1. Replace the faulty torque management request input sensor
2. Repair or replace any damaged wiring or connectors in the circuit
3. Update the ECM software if necessary
4. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC P2551 on BMW

To erase the DTC P2551 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM
2. Disconnect the vehicle’s battery for a few minutes to reset the ECM
3. After performing the necessary repairs, clear the fault codes again to ensure they do not return

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.