P2597 – BMW DTC

BMW DTC P2597 – Turbocharger Speed Sensor ‘B’ Circuit Intermittent

DTC P2597 meaning on BMW

DTC P2597 refers to the Turbocharger Speed Sensor ‘B’ Circuit Intermittent. This diagnostic trouble code indicates that there is an intermittent electrical issue in the circuit related to the turbocharger speed sensor ‘B’ in a BMW vehicle.

BMW DTC P2597 symptoms

Symptoms of DTC P2597 in a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Engine stalling or hesitation

BMW DTC P2597 causes

Common causes of DTC P2597 in a BMW include:

• Faulty turbocharger speed sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Intermittent electrical connection problems
• Software or calibration issues

BMW DTC P2597 seriousness

DTC P2597 should not be ignored as it can lead to reduced engine performance and potential drivability issues. If left unresolved, it may cause further damage to the turbocharger system and other engine components.

How to diagnose DTC P2597 on BMW

To diagnose DTC P2597 on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scan tool to retrieve the fault code and related data
2. Inspect the turbocharger speed sensor ‘B’ and its wiring for any visible damage or corrosion
3. Check the sensor’s electrical connections for proper contact and continuity
4. Perform a road test to monitor the sensor’s operation and compare it to expected values

How to fix DTC P2597 on BMW

To fix DTC P2597 on a BMW, the following steps may be taken:

1. Replace the faulty turbocharger speed sensor ‘B’ if it is determined to be the cause
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clear the fault code using a diagnostic scan tool after the repair is completed
4. Perform a test drive to ensure the issue has been resolved and the Check Engine Light does not reappear

How to erase DTC P2597 on BMW

To erase DTC P2597 on a BMW, follow these steps:

1. Connect a diagnostic scan tool to the vehicle’s OBD-II port
2. Select the option to clear or erase fault codes from the system
3. Confirm the action and wait for the scan tool to complete the process
4. Disconnect the scan tool and start the vehicle to ensure the fault code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.