BMW DTC P2616 – Camshaft Position Signal Output Circuit High
DTC P2616 meaning on BMW
DTC P2616 on a BMW indicates a fault with the camshaft position signal output circuit. This fault code is triggered when the Engine Control Module (ECM) detects a high voltage signal from the camshaft position sensor, which is outside the normal operating range.
BMW DTC P2616 symptoms
Symptoms of DTC P2616 on a BMW may include:
- Check Engine Light illuminated
- Engine running rough or misfiring
- Reduced engine performance
- Potential stalling or difficulty starting the engine
BMW DTC P2616 causes
The common causes of DTC P2616 on a BMW include:
- Faulty camshaft position sensor
- Wiring or connector issues in the camshaft position sensor circuit
- ECM software or hardware problems
BMW DTC P2616 seriousness
While DTC P2616 may not always result in immediate drivability issues, it is important to address this fault code promptly. Ignoring this fault can lead to potential engine performance problems and may cause further damage if left unresolved.
How to diagnose DTC P2616 on BMW
To diagnose DTC P2616 on a BMW, follow these steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the camshaft position sensor and its wiring for any visible damage or corrosion
- Check the camshaft position sensor signal using a multimeter
- Perform a continuity test on the sensor circuit to check for any open or short circuits
- Verify the ECM software is up to date
How to fix DTC P2616 on BMW
To fix DTC P2616 on a BMW, consider the following steps:
- Replace the faulty camshaft position sensor if it is found to be defective
- Repair any damaged wiring or connectors in the camshaft position sensor circuit
- If the ECM is determined to be the issue, reprogram or replace it as necessary
How to erase DTC P2616 on BMW
To erase DTC P2616 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue that caused the fault code, you can then reset the ECM and verify that the code does not return.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.