P2619 – BMW DTC

BMW DTC P2619 – Crankshaft Position Signal Output Circuit High

DTC P2619 meaning on BMW

DTC P2619 on a BMW indicates a fault with the crankshaft position signal output circuit. This fault occurs when the Engine Control Module (ECM) detects a high voltage signal from the crankshaft position sensor, which is outside the normal operating range.

BMW DTC P2619 symptoms

Symptoms of DTC P2619 on a BMW may include:

• Check Engine Light illuminated
• Engine may run rough or misfire
• Reduced engine performance
• Difficulty starting the engine

BMW DTC P2619 causes

Common causes of DTC P2619 on a BMW include:

• Faulty crankshaft position sensor
• Wiring or connector issues in the crankshaft position sensor circuit
• ECM software or hardware issues

BMW DTC P2619 seriousness

DTC P2619 should be addressed promptly as it can lead to drivability issues and potential engine damage if left unresolved. Ignoring this fault may result in poor engine performance and increased fuel consumption.

How to diagnose DTC P2619 on BMW

To diagnose DTC P2619 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the crankshaft position sensor and its wiring for any visible damage
3. Perform a continuity test on the sensor circuit to check for any open or short circuits
4. Check the ECM for any software updates or faults

How to fix DTC P2619 on BMW

To fix DTC P2619 on a BMW, consider the following:

1. Replace the faulty crankshaft position sensor
2. Repair any damaged wiring or connectors in the sensor circuit
3. Update the ECM software if necessary
4. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P2619 on BMW

To erase DTC P2619 on a BMW, use a diagnostic scanner to clear the fault code from the ECM’s memory. After clearing the code, perform a test drive to verify that the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.