BMW DTC P2634 – Fuel Pump ‘B’ Control Circuit High
DTC P2634 meaning on BMW
The Diagnostic Trouble Code (DTC) P2634 for BMW refers to the Fuel Pump ‘B’ Control Circuit High. This code indicates that there is a high voltage condition detected in the control circuit of fuel pump ‘B’. The Engine Control Module (ECM) monitors the fuel pump control circuit for abnormalities, and when a high voltage is detected, it triggers the P2634 fault code.
BMW DTC P2634 symptoms
Symptoms associated with DTC P2634 on a BMW may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Engine stalling or hesitation during acceleration
- Decreased fuel efficiency
- Difficulty starting the engine
BMW DTC P2634 causes
The common causes of DTC P2634 on a BMW include:
- Faulty fuel pump ‘B’
- Corroded or damaged wiring in the fuel pump control circuit
- Issues with the fuel pump relay
- Defective Engine Control Module (ECM)
BMW DTC P2634 seriousness
DTC P2634 should not be ignored as it can lead to potential drivability issues and engine performance problems. If left unresolved, it may result in engine stalling, poor fuel economy, and other related issues. It is recommended to address this fault code promptly to prevent further damage to the vehicle.
How to diagnose DTC P2634 on BMW
To diagnose DTC P2634 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM
- Inspect the fuel pump ‘B’ and its control circuit for any visible damage or corrosion
- Check the fuel pump relay for proper operation
- Test the voltage and continuity in the fuel pump control circuit
- Inspect the ECM for any signs of malfunction
How to fix DTC P2634 on BMW
To fix DTC P2634 on a BMW, the following steps may be taken:
- Replace the faulty fuel pump ‘B’ if it is determined to be the cause
- Repair or replace any damaged wiring in the fuel pump control circuit
- Replace the fuel pump relay if found to be faulty
- If the ECM is diagnosed as the issue, it may need to be reprogrammed or replaced
How to erase DTC P2634 on BMW
To erase DTC P2634 on a BMW, the fault code can be cleared using a diagnostic scanner. After the necessary repairs have been made to address the underlying issue causing the fault code, the scanner can be used to clear the code from the ECM’s memory. This will reset the Check Engine Light and ensure that the fault code is no longer present.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.