P2665 – BMW DTC

BMW DTC P2665 – Fuel Shutoff Valve ‘B’ Control Circuit/Open

DTC P2665 meaning on BMW

DTC P2665 for BMW refers to the Fuel Shutoff Valve ‘B’ Control Circuit/Open. This diagnostic trouble code indicates that there is an open circuit or a fault in the control circuit for the fuel shutoff valve ‘B’ in the vehicle’s fuel system.

BMW DTC P2665 symptoms

Symptoms of DTC P2665 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Engine stalling or hesitation during acceleration
• Reduced engine performance
• Difficulty starting the engine

BMW DTC P2665 causes

The potential causes of DTC P2665 on a BMW include:

• Faulty fuel shutoff valve ‘B’
• Open or short circuit in the control wiring for the fuel shutoff valve
• Corrosion or poor connections in the wiring harness
• Defective engine control module (ECM)

BMW DTC P2665 seriousness

DTC P2665 should not be ignored as it can lead to drivability issues and potential engine damage if left unresolved. It is recommended to address this fault code promptly to prevent further complications.

How to diagnose DTC P2665 on BMW

To diagnose DTC P2665 on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the fuel shutoff valve ‘B’ and its wiring for any visible damage or corrosion
3. Check the continuity of the control circuit using a multimeter
4. Test the fuel shutoff valve for proper operation
5. Inspect the ECM for any signs of malfunction

How to fix DTC P2665 on BMW

To fix DTC P2665 on a BMW, the following steps may be taken:

1. Replace the faulty fuel shutoff valve ‘B’ if necessary
2. Repair any open or short circuits in the control wiring
3. Clean or repair any corroded connections in the wiring harness
4. If the ECM is found to be defective, it may need to be replaced or reprogrammed

How to erase DTC P2665 on BMW

After addressing the underlying issue causing DTC P2665 on a BMW, the fault code can be erased using a diagnostic scanner. This will clear the code from the ECM’s memory and turn off the Check Engine Light. Ensure that the repair has been completed successfully before clearing the fault code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.