P2695 – BMW DTC

BMW DTC P2695 – Cylinder 10 Injector Data Incompatible

DTC P2695 meaning on BMW

The Diagnostic Trouble Code (DTC) P2695 for BMW indicates that there is an issue with the fuel injector in cylinder 10. This code specifically points to data incompatibility related to the injector, suggesting that the information being received by the engine control module (ECM) from the injector is not matching the expected values.

BMW DTC P2695 symptoms

Symptoms associated with DTC P2695 on a BMW may include:

• Engine misfires
• Reduced engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P2695 causes

The potential causes of DTC P2695 on a BMW include:

• Faulty fuel injector in cylinder 10
• Wiring or connector issues related to the injector
• ECM software or hardware problems
• Injector driver circuit malfunctions

BMW DTC P2695 seriousness

DTC P2695 should be addressed promptly to prevent potential engine damage and ensure optimal vehicle performance. Ignoring this code can lead to further complications and potentially more costly repairs down the line.

How to diagnose DTC P2695 on BMW

To diagnose DTC P2695 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the wiring and connectors related to the fuel injector in cylinder 10 for any visible damage or corrosion.
3. Test the fuel injector using a multimeter to check for proper resistance and functionality.
4. Check the ECM for any software updates or malfunctions that may be causing the data incompatibility.

How to fix DTC P2695 on BMW

To fix DTC P2695 on a BMW, you can consider the following actions:

1. Replace the faulty fuel injector in cylinder 10 with a new, compatible unit.
2. Repair or replace any damaged wiring or connectors associated with the injector.
3. Update the ECM software to the latest version to address any compatibility issues.
4. If necessary, troubleshoot and repair any faults in the injector driver circuit.

How to erase DTC P2695 on BMW

To erase DTC P2695 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM.
2. After addressing the underlying issue causing the fault code, drive the vehicle to allow the ECM to relearn and verify the repair.
3. If the repair was successful and the issue is resolved, the Check Engine Light should turn off automatically.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.