P26A4 – BMW DTC

BMW DTC P26A4 – Engine Coolant Bypass Valve ‘A’ Position Sensor Circuit

DTC P26A4 meaning on BMW

The DTC P26A4 code on a BMW indicates a fault with the Engine Coolant Bypass Valve ‘A’ Position Sensor Circuit. This means that the engine control module (ECM) has detected an issue with the position sensor circuit of the coolant bypass valve, which is responsible for regulating the flow of coolant in the engine.

BMW DTC P26A4 symptoms

Symptoms of the BMW DTC P26A4 code may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine overheating or running hotter than normal
• Decreased fuel efficiency
• Engine performance issues

BMW DTC P26A4 causes

Common causes of the BMW DTC P26A4 code include:

• Faulty Engine Coolant Bypass Valve ‘A’ Position Sensor
• Wiring or connector issues in the sensor circuit
• ECM software or hardware problems

BMW DTC P26A4 seriousness

The BMW DTC P26A4 code should be addressed promptly to prevent potential engine damage or overheating issues. Ignoring this code can lead to more severe problems and costly repairs in the future.

How to diagnose DTC P26A4 on BMW

To diagnose the DTC P26A4 code on a BMW, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault codes stored in the ECM
2. Inspect the Engine Coolant Bypass Valve ‘A’ Position Sensor and its wiring for any visible damage or corrosion
3. Check the sensor’s resistance and voltage values to ensure it is functioning correctly
4. Perform a visual inspection of the coolant bypass valve system for any leaks or blockages

How to fix DTC P26A4 on BMW

To fix the DTC P26A4 code on a BMW, you can try the following solutions:

1. Replace the Engine Coolant Bypass Valve ‘A’ Position Sensor if it is faulty
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Clear the fault codes using an OBD-II scanner after making the necessary repairs
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P26A4 on BMW

To erase the DTC P26A4 code on a BMW, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port
2. Select the ¨Erase Codes¨ or ¨Clear Codes¨ option on the scanner
3. Follow the on-screen prompts to confirm the deletion of the fault codes
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.