P26CE – BMW DTC

BMW DTC P26CE – Engine Coolant Pump Overspeed

DTC P26CE meaning on BMW

The DTC P26CE code on a BMW indicates an issue with the engine coolant pump overspeed. This means that the engine coolant pump is operating at a speed higher than the specified limit set by the vehicle’s computer system.

BMW DTC P26CE symptoms

Symptoms of the DTC P26CE code on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Engine overheating
• Loss of engine power
• Unusual noise coming from the engine compartment

BMW DTC P26CE causes

The common causes of the DTC P26CE code on a BMW are:

• Defective engine coolant pump
• Faulty engine coolant pump control module
• Wiring or connection issues related to the engine coolant pump

BMW DTC P26CE seriousness

The DTC P26CE code should be addressed promptly as it can lead to engine overheating and potential damage if left unresolved. Continuing to drive the vehicle with this issue can result in more severe engine problems and potential breakdown.

How to diagnose DTC P26CE on BMW

To diagnose the DTC P26CE code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer system
2. Inspect the engine coolant pump for any visible signs of damage or leaks
3. Check the wiring and connections related to the engine coolant pump for any issues
4. Test the engine coolant pump control module for proper functionality

How to fix DTC P26CE on BMW

To fix the DTC P26CE code on a BMW, the following steps may be taken:

1. Replace the defective engine coolant pump with a new one
2. Repair or replace any damaged wiring or connections related to the engine coolant pump
3. If the engine coolant pump control module is faulty, replace it with a new one
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC P26CE on BMW

To erase the DTC P26CE code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s computer system
2. Select the option to clear fault codes or reset the system
3. Follow the on-screen prompts to confirm the deletion of the DTC P26CE code
4. Once the code has been successfully erased, perform a test drive to ensure the issue has been resolved

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.