P26D2 – BMW DTC

BMW DTC P26D2 – Engine Coolant Pump Control Module Over Temperature

DTC P26D2 meaning on BMW

The DTC P26D2 error code on BMW vehicles indicates an issue with the Engine Coolant Pump Control Module being over temperature. This means that the control module responsible for managing the engine coolant pump has detected that its temperature has exceeded the specified threshold, leading to a malfunction in the cooling system.

BMW DTC P26D2 symptoms

Some common symptoms associated with the BMW DTC P26D2 error code may include:

• Engine overheating
• Reduced engine performance
• Check Engine Light (CEL) illuminated on the dashboard
• Increased fuel consumption

BMW DTC P26D2 causes

The potential causes of the BMW DTC P26D2 error code include:

• Malfunctioning Engine Coolant Pump Control Module
• Issues with the engine cooling system
• Electrical faults in the control module circuitry

BMW DTC P26D2 seriousness

Ignoring the DTC P26D2 error code on a BMW can lead to serious consequences such as engine overheating, which may result in engine damage or failure if not addressed promptly. It is crucial to diagnose and resolve this issue to prevent further complications.

How to diagnose DTC P26D2 on BMW

To diagnose the DTC P26D2 error code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the Engine Coolant Pump Control Module for any visible signs of damage or overheating
3. Check the engine cooling system components for proper operation
4. Test the control module circuitry for any electrical faults

How to fix DTC P26D2 on BMW

To fix the DTC P26D2 error code on a BMW, the following steps may be taken:

1. Replace the Engine Coolant Pump Control Module if it is found to be faulty
2. Repair or replace any damaged cooling system components
3. Address any electrical issues in the control module circuitry
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC P26D2 on BMW

To erase the DTC P26D2 error code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the scanner’s menu to clear the fault codes stored in the vehicle’s computer
3. Follow the on-screen instructions to erase the DTC P26D2 code
4. Verify that the code has been successfully cleared by checking for any remaining fault codes

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.