BMW DTC P26F8 – Coolant Pump ‘C’ Stuck
DTC P26F8 meaning on BMW
The DTC P26F8 code on a BMW indicates that the coolant pump ‘C’ is stuck. This means that the control module has detected a malfunction in the operation of the coolant pump, specifically pump ‘C’, which is responsible for circulating coolant through the engine to maintain optimal operating temperatures.
BMW DTC P26F8 symptoms
Symptoms of the DTC P26F8 code on a BMW may include:
- Engine overheating
- Low coolant warning light illuminated
- Loss of engine power
- Check Engine Light (CEL) illuminated
BMW DTC P26F8 causes
The common causes of the DTC P26F8 code on a BMW include:
- Stuck or faulty coolant pump ‘C’
- Electrical issues with the coolant pump circuit
- Low coolant level
- Coolant pump control module failure
BMW DTC P26F8 seriousness
The DTC P26F8 code should be taken seriously as it can lead to engine overheating and potential damage if not addressed promptly. Driving with a malfunctioning coolant pump can result in engine failure and costly repairs.
How to diagnose DTC P26F8 on BMW
To diagnose the DTC P26F8 code on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the coolant pump ‘C’ for any physical obstructions or signs of damage
- Check the coolant level and quality
- Test the coolant pump circuit for proper voltage and continuity
- Inspect the coolant pump control module for any faults
How to fix DTC P26F8 on BMW
To fix the DTC P26F8 code on a BMW, the following steps may be taken:
- Replace the coolant pump ‘C’ if it is stuck or faulty
- Repair any electrical issues in the coolant pump circuit
- Top up the coolant level and ensure it is at the correct concentration
- Replace the coolant pump control module if necessary
How to erase DTC P26F8 on BMW
After fixing the underlying issue causing the DTC P26F8 code on a BMW, the code can be erased using a diagnostic scanner. This will clear the code from the vehicle’s memory and turn off the Check Engine Light. It is important to ensure that the repair has been successful before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.