BMW DTC P2714 – Pressure Control Solenoid ‘D’ Performance/Stuck Off
DTC P2714 meaning on BMW
DTC P2714 on a BMW indicates an issue with the Pressure Control Solenoid ‘D’ performance or that it is stuck off. This solenoid is responsible for regulating the hydraulic pressure within the transmission, which is crucial for proper gear shifting and overall transmission operation.
BMW DTC P2714 symptoms
Symptoms of DTC P2714 on a BMW may include harsh or delayed shifting, transmission slipping, poor acceleration, decreased fuel efficiency, and in some cases, the transmission may go into limp mode. The Check Engine Light may also be illuminated on the dashboard.
BMW DTC P2714 causes
The common causes of DTC P2714 on a BMW include a faulty pressure control solenoid ‘D’, low transmission fluid level, dirty or contaminated transmission fluid, electrical issues such as wiring harness problems or a faulty transmission control module.
BMW DTC P2714 seriousness
DTC P2714 should be taken seriously as it can lead to further damage to the transmission if left unresolved. Ignoring this issue can result in costly repairs or even transmission failure, which can leave the vehicle inoperable.
How to diagnose DTC P2714 on BMW
To diagnose DTC P2714 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes from the vehicle’s onboard computer. They would then inspect the transmission fluid level and condition, check the wiring and connectors related to the pressure control solenoid ‘D’, and perform a thorough visual inspection of the transmission components.
How to fix DTC P2714 on BMW
Fixing DTC P2714 on a BMW may involve replacing the pressure control solenoid ‘D’ if it is found to be faulty. Additionally, ensuring the transmission fluid is at the correct level and in good condition is important. Addressing any electrical issues, such as repairing damaged wiring or replacing a faulty transmission control module, may also be necessary.
How to erase DTC P2714 on BMW
Once the underlying issue causing DTC P2714 on a BMW has been fixed, the fault codes can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the vehicle’s onboard computer to monitor the system for any new faults.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.