BMW DTC P2716 – Pressure Control Solenoid ‘D’ Electrical
DTC P2716 meaning on BMW
DTC P2716 on a BMW indicates an issue with the Pressure Control Solenoid ‘D’ electrical circuit. This fault code is triggered when the Engine Control Module (ECM) detects a problem with the electrical signal sent to the pressure control solenoid ‘D’, which is responsible for regulating hydraulic pressure within the transmission.
BMW DTC P2716 symptoms
Symptoms of DTC P2716 on a BMW may include harsh shifting, delayed engagement when shifting gears, transmission slipping, and in some cases, the transmission may go into a fail-safe or limp mode. The Check Engine Light (CEL) may also illuminate on the dashboard.
BMW DTC P2716 causes
The common causes of DTC P2716 on a BMW include a faulty pressure control solenoid ‘D’, damaged wiring or connectors in the solenoid circuit, low transmission fluid level or dirty fluid, or a malfunctioning ECM.
BMW DTC P2716 seriousness
DTC P2716 should be addressed promptly as it can lead to further damage to the transmission if left unresolved. Driving with this fault code present can cause erratic shifting behavior and potential transmission failure.
How to diagnose DTC P2716 on BMW
To diagnose DTC P2716 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and any related codes. They would then inspect the pressure control solenoid ‘D’, check the wiring and connectors for any damage, and test the solenoid’s resistance and operation. Additionally, a transmission fluid level and condition check may be performed.
How to fix DTC P2716 on BMW
Fixing DTC P2716 on a BMW may involve replacing the pressure control solenoid ‘D’ if it is found to be faulty. The wiring and connectors should be repaired or replaced if any damage is detected. Ensuring the transmission fluid is at the correct level and in good condition is also important. In some cases, reprogramming or replacing the ECM may be necessary.
How to erase DTC P2716 on BMW
Once the underlying issue causing DTC P2716 on a BMW has been fixed, the fault code can be erased using a diagnostic scanner. The mechanic would clear the code from the ECM’s memory, and if the repair was successful, the Check Engine Light should turn off. It is important to verify that the issue has been resolved by test-driving the vehicle to ensure proper transmission operation.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.