P272D – BMW DTC

BMW DTC P272D – Park Pawl Motor Control Circuit Current Too High

DTC P272D meaning on BMW

The Diagnostic Trouble Code (DTC) P272D for BMW refers to the ¨Park Pawl Motor Control Circuit Current Too High.¨ This code indicates that there is an issue with the electrical circuit controlling the park pawl motor, which is responsible for engaging the parking pawl in the transmission to prevent the vehicle from moving when in park.

BMW DTC P272D symptoms

Symptoms associated with BMW DTC P272D may include:

• Difficulty shifting into or out of park
• Unintended movement of the vehicle when in park
• Check Engine Light illuminated on the dashboard
• Transmission not engaging properly

BMW DTC P272D causes

Common causes of BMW DTC P272D may include:

• Faulty park pawl motor
• Short circuit or open circuit in the wiring harness
• Defective park pawl motor control module
• Corrosion or poor connections in the electrical system

BMW DTC P272D seriousness

Ignoring BMW DTC P272D can lead to safety hazards such as unintended vehicle movement, which can result in accidents or damage to the transmission components. It is important to address this issue promptly to ensure the safe operation of the vehicle.

How to diagnose DTC P272D on BMW

To diagnose BMW DTC P272D, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the park pawl motor and its wiring for any visible damage or corrosion
3. Test the park pawl motor control circuit for proper voltage and continuity
4. Check for any loose or damaged connections in the electrical system

How to fix DTC P272D on BMW

To fix BMW DTC P272D, the following steps may be taken:

1. Replace the faulty park pawl motor if it is determined to be the cause of the issue
2. Repair any damaged wiring or connectors in the park pawl motor control circuit
3. Replace the park pawl motor control module if necessary
4. Clear the fault codes from the vehicle’s computer after the repairs have been completed

How to erase DTC P272D on BMW

To erase BMW DTC P272D, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s computer system
2. Select the option to clear the fault codes stored in the system
3. Follow the on-screen prompts to confirm the deletion of the DTC P272D code
4. Once the code has been successfully cleared, verify that the Check Engine Light is no longer illuminated

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.