BMW DTC P2733 – Pressure Control Solenoid ‘F’ Stuck On
DTC P2733 meaning on BMW
DTC P2733 indicates that the Pressure Control Solenoid ‘F’ is stuck on in a BMW vehicle. This means that the solenoid responsible for controlling hydraulic pressure within the transmission is not functioning properly, leading to potential issues with gear shifting and overall transmission performance.
BMW DTC P2733 symptoms
Symptoms of DTC P2733 in a BMW may include harsh or delayed shifting, erratic transmission behavior, transmission slipping, decreased fuel efficiency, and in some cases, the transmission may go into a fail-safe or limp mode.
BMW DTC P2733 causes
The common causes of DTC P2733 in a BMW include a faulty pressure control solenoid ‘F’, wiring or connector issues related to the solenoid, low transmission fluid level or dirty fluid, internal transmission problems, or a malfunctioning transmission control module.
BMW DTC P2733 seriousness
DTC P2733 should be taken seriously as it can lead to further transmission damage if left unresolved. Continued driving with this fault can cause additional stress on the transmission components and potentially result in costly repairs.
How to diagnose DTC P2733 on BMW
To diagnose DTC P2733 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault code and then perform a thorough inspection of the transmission system. This may involve checking the pressure control solenoid ‘F’, inspecting the wiring and connectors, examining the transmission fluid condition, and conducting a test drive to observe the transmission behavior.
How to fix DTC P2733 on BMW
Fixing DTC P2733 on a BMW usually involves replacing the faulty pressure control solenoid ‘F’. Additionally, any damaged wiring or connectors should be repaired or replaced. It is also recommended to perform a transmission fluid flush and filter replacement if necessary. In some cases, recalibrating or reprogramming the transmission control module may be required.
How to erase DTC P2733 on BMW
Once the underlying issue causing DTC P2733 has been fixed, the fault code can be erased using a diagnostic scanner. The scanner can clear the code from the vehicle’s memory, resetting the check engine light and allowing for a fresh start to monitor the transmission system for any new issues.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.