P2736 – BMW DTC

BMW DTC P2736 – Pressure Control Solenoid ‘F’ Control Circuit/Open

DTC P2736 meaning on BMW

DTC P2736 on a BMW indicates an issue with the Pressure Control Solenoid ‘F’ control circuit being open. This means that the powertrain control module (PCM) has detected an open circuit in the solenoid or its wiring, preventing proper operation of the solenoid.

BMW DTC P2736 symptoms

Symptoms of DTC P2736 on a BMW may include harsh shifting, delayed shifting, transmission slipping, decreased fuel efficiency, and in some cases, the transmission may go into a limp mode where it operates in a single gear.

BMW DTC P2736 causes

The common causes of DTC P2736 on a BMW include a faulty pressure control solenoid ‘F’, damaged wiring or connectors in the solenoid circuit, low transmission fluid level, or a malfunctioning PCM.

BMW DTC P2736 seriousness

DTC P2736 should be addressed promptly as it can lead to further damage to the transmission if left unresolved. Ignoring this fault code may result in transmission failure and costly repairs.

How to diagnose DTC P2736 on BMW

To diagnose DTC P2736 on a BMW, a mechanic would typically start by using a scan tool to retrieve the fault code and then perform a visual inspection of the pressure control solenoid ‘F’ and its wiring. They may also conduct tests to check the resistance of the solenoid and inspect the transmission fluid level and condition.

How to fix DTC P2736 on BMW

Fixing DTC P2736 on a BMW involves replacing the faulty pressure control solenoid ‘F’ if it is determined to be the cause of the issue. Additionally, any damaged wiring or connectors should be repaired or replaced. It is also essential to ensure the transmission fluid level is correct and of good quality.

How to erase DTC P2736 on BMW

After fixing the underlying issue causing DTC P2736 on a BMW, the fault code can be erased using a scan tool. This will clear the code from the PCM’s memory and reset the transmission control module. It is important to verify that the issue has been resolved before clearing the fault code.