P2760 – BMW DTC

BMW DTC P2760 – Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent

DTC P2760 meaning on BMW

DTC P2760 on a BMW indicates an intermittent issue with the Torque Converter Clutch Pressure Control Solenoid Control Circuit. This means that the vehicle’s onboard computer has detected a problem with the circuit responsible for controlling the torque converter clutch pressure solenoid.

BMW DTC P2760 symptoms

Symptoms of DTC P2760 on a BMW may include:

• Harsh shifting
• Transmission slipping
• Decreased fuel efficiency
• Check Engine Light illuminated

BMW DTC P2760 causes

Common causes of DTC P2760 on a BMW include:

• Faulty torque converter clutch pressure control solenoid
• Wiring issues in the solenoid control circuit
• Corroded or damaged connectors
• Low transmission fluid level

BMW DTC P2760 seriousness

DTC P2760 should be addressed promptly as it can lead to further transmission issues if left unresolved. Ignoring this fault may result in damage to the transmission components and potentially lead to costly repairs.

How to diagnose DTC P2760 on BMW

To diagnose DTC P2760 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the torque converter clutch pressure control solenoid and its wiring for any visible damage
3. Check the transmission fluid level and condition
4. Perform a test drive to observe the symptoms and confirm the issue

How to fix DTC P2760 on BMW

To fix DTC P2760 on a BMW, the following steps may be taken:

1. Replace the torque converter clutch pressure control solenoid if faulty
2. Repair or replace any damaged wiring or connectors in the solenoid control circuit
3. Ensure the transmission fluid level is correct and top up if necessary
4. Clear the fault code and test drive the vehicle to confirm the repair

How to erase DTC P2760 on BMW

To erase DTC P2760 on a BMW, the fault code can be cleared using a diagnostic scanner. After the repair has been completed, the mechanic can reset the code, and the Check Engine Light should turn off if the issue has been successfully resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.