P2762 – BMW DTC

BMW DTC P2762 – Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance

DTC P2762 meaning on BMW

DTC P2762 on a BMW indicates an issue with the Torque Converter Clutch Pressure Control Solenoid Control Circuit. This fault code is triggered when the Engine Control Module (ECM) detects that the signal from the solenoid controlling the torque converter clutch pressure is outside the expected range or performance parameters.

BMW DTC P2762 symptoms

Symptoms of DTC P2762 on a BMW may include:

• Harsh shifting
• Transmission slipping
• Decreased fuel efficiency
• Transmission overheating
• Illuminated Check Engine Light

BMW DTC P2762 causes

Common causes of DTC P2762 on a BMW include:

• Faulty Torque Converter Clutch Pressure Control Solenoid
• Wiring or connector issues in the solenoid circuit
• Low transmission fluid level or poor quality fluid
• Internal transmission problems

BMW DTC P2762 seriousness

Ignoring DTC P2762 on a BMW can lead to further transmission damage and potential drivability issues. It is important to address this fault code promptly to prevent more severe problems and costly repairs.

How to diagnose DTC P2762 on BMW

To diagnose DTC P2762 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the Torque Converter Clutch Pressure Control Solenoid and its wiring for any visible damage
3. Check the transmission fluid level and condition
4. Perform a road test to observe the transmission behavior

How to fix DTC P2762 on BMW

To fix DTC P2762 on a BMW, the following steps may be taken:

1. Replace the faulty Torque Converter Clutch Pressure Control Solenoid
2. Repair or replace any damaged wiring or connectors in the solenoid circuit
3. Ensure the transmission fluid is at the correct level and of the recommended quality
4. If internal transmission issues are found, further diagnosis and repair may be necessary

How to erase DTC P2762 on BMW

After fixing the underlying issue causing DTC P2762 on a BMW, the fault code can be erased using a diagnostic scanner. This will clear the code from the ECM’s memory and turn off the Check Engine Light. It is important to verify that the repair was successful by performing a road test and confirming that the code does not return.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.