P2772 – BMW DTC

BMW DTC P2772 – Four Wheel Drive (4WD) Low Switch Circuit Range/Performance

DTC P2772 meaning on BMW

The Diagnostic Trouble Code (DTC) P2772 for BMW refers to the Four Wheel Drive (4WD) Low Switch Circuit Range/Performance. This code indicates that there is an issue with the circuit that controls the 4WD Low switch, affecting the performance or range of operation.

BMW DTC P2772 symptoms

Symptoms of DTC P2772 on a BMW may include:

• 4WD system not engaging properly
• 4WD system getting stuck in low range
• Illumination of the 4WD warning light on the dashboard
• Decreased traction or stability in certain driving conditions

BMW DTC P2772 causes

Common causes of DTC P2772 on a BMW include:

• Faulty 4WD Low switch
• Wiring or connection issues in the 4WD Low switch circuit
• Defective 4WD control module
• Corrosion or damage to related components

BMW DTC P2772 seriousness

The seriousness of DTC P2772 on a BMW depends on the driving conditions and the extent of the issue. While the vehicle may still be operable, the malfunctioning 4WD system can compromise traction and stability, especially in off-road or slippery conditions. It is recommended to address this issue promptly to ensure safe driving.

How to diagnose DTC P2772 on BMW

To diagnose DTC P2772 on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the 4WD Low switch and its circuit for any visible damage or corrosion
3. Check the wiring and connections for continuity and proper voltage
4. Test the 4WD control module for functionality

How to fix DTC P2772 on BMW

To fix DTC P2772 on a BMW, the following steps may be taken:

1. Replace the faulty 4WD Low switch if necessary
2. Repair or replace any damaged wiring or connections in the circuit
3. If the 4WD control module is defective, it may need to be replaced
4. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P2772 on BMW

To erase DTC P2772 on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s onboard computer system
2. Select the option to clear or erase fault codes
3. Confirm the action and wait for the process to complete
4. Perform a test drive to verify that the fault code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.