BMW DTC P2784 – Input/Turbine Speed Sensor ‘A’/’B’ Correlation
DTC P2784 meaning on BMW
DTC P2784 on a BMW indicates a correlation problem between Input/Turbine Speed Sensor ‘A’ and ‘B’. This means that the Engine Control Module (ECM) has detected a discrepancy in the rotational speeds of these sensors, which are crucial for proper transmission operation.
BMW DTC P2784 symptoms
Symptoms of DTC P2784 on a BMW may include erratic shifting, harsh shifting, transmission slipping, decreased fuel efficiency, and in some cases, the transmission may go into a fail-safe mode to prevent further damage.
BMW DTC P2784 causes
The most common causes of DTC P2784 on a BMW are faulty Input/Turbine Speed Sensors, damaged wiring or connectors related to these sensors, low transmission fluid level, or internal transmission issues.
BMW DTC P2784 seriousness
DTC P2784 should be taken seriously as it can lead to further transmission damage if not addressed promptly. Ignoring this code may result in costly repairs or even transmission failure.
How to diagnose DTC P2784 on BMW
To diagnose DTC P2784 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes and then perform a visual inspection of the Input/Turbine Speed Sensors, wiring, and connectors. They may also conduct a road test to observe the transmission’s behavior.
- Use a diagnostic scanner to retrieve fault codes.
- Inspect Input/Turbine Speed Sensors, wiring, and connectors for damage.
- Perform a road test to observe transmission behavior.
How to fix DTC P2784 on BMW
Fixing DTC P2784 on a BMW typically involves replacing the faulty Input/Turbine Speed Sensors, repairing any damaged wiring or connectors, ensuring the transmission fluid level is correct, and addressing any internal transmission issues if present.
- Replace faulty Input/Turbine Speed Sensors.
- Repair damaged wiring or connectors.
- Check and correct transmission fluid level.
- Address any internal transmission issues.
How to erase DTC P2784 on BMW
To erase DTC P2784 on a BMW, a mechanic would use a diagnostic scanner to clear the fault codes stored in the ECM. It is important to ensure that the underlying issue causing the fault code has been addressed before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.