BMW DTC P27AE – Pressure Control Solenoid ‘H’ Data Incompatible
DTC P27AE meaning on BMW
The DTC P27AE code on a BMW indicates that there is a data incompatibility issue with the Pressure Control Solenoid ‘H’. This means that the signal being received by the vehicle’s control module from the solenoid does not match the expected values, leading to a malfunction in the pressure control system.
BMW DTC P27AE symptoms
Symptoms of the DTC P27AE code on a BMW may include erratic shifting behavior, transmission slipping, harsh shifting, decreased fuel efficiency, and in some cases, the transmission may go into a limp mode where it operates in a single gear only.
BMW DTC P27AE causes
The most common causes of the DTC P27AE code on a BMW are a faulty Pressure Control Solenoid ‘H’, wiring issues such as shorts or open circuits, a defective transmission control module, or a software glitch in the vehicle’s computer system.
BMW DTC P27AE seriousness
Ignoring the DTC P27AE code on a BMW can lead to further damage to the transmission system and potentially result in complete transmission failure. It is important to address this issue promptly to prevent costly repairs down the line.
How to diagnose DTC P27AE on BMW
To diagnose the DTC P27AE code on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer system. They would then perform a visual inspection of the wiring harness and connectors related to the Pressure Control Solenoid ‘H’ to check for any visible damage. Additionally, testing the solenoid itself and checking the transmission fluid level and condition may also be necessary.
How to fix DTC P27AE on BMW
Fixing the DTC P27AE code on a BMW usually involves replacing the faulty Pressure Control Solenoid ‘H’ and addressing any wiring issues that may be present. In some cases, reprogramming or updating the transmission control module software may also be necessary to resolve the data incompatibility problem.
How to erase DTC P27AE on BMW
Once the underlying issue causing the DTC P27AE code on a BMW has been fixed, the fault codes can be cleared using a diagnostic scanner. This will reset the vehicle’s computer system and turn off the check engine light. It is important to ensure that the repairs have been successful before clearing the codes to prevent the issue from recurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.