BMW DTC P27BF – Pressure Control Solenoid ¿N¿ Control Circuit Low
DTC P27BF meaning on BMW
The DTC P27BF fault code on BMW vehicles indicates an issue with the Pressure Control Solenoid N control circuit being detected as low. This fault code is specific to the transmission system and points towards a problem with the solenoid responsible for controlling hydraulic pressure within the transmission.
BMW DTC P27BF symptoms
Symptoms associated with the BMW DTC P27BF code may include harsh shifting, transmission slipping, delayed engagement, or even the transmission going into limp mode. The vehicle’s transmission may also exhibit erratic behavior or fail to shift properly.
BMW DTC P27BF causes
The causes of the DTC P27BF fault code on BMW vehicles can vary, but common reasons include a faulty pressure control solenoid N, damaged wiring or connectors in the control circuit, low transmission fluid level, or internal transmission issues.
BMW DTC P27BF seriousness
Ignoring the DTC P27BF fault code on a BMW can lead to further transmission damage and potentially result in costly repairs if left unresolved. It is important to address this issue promptly to prevent any long-term damage to the transmission system.
How to diagnose DTC P27BF on BMW
To diagnose the DTC P27BF code on a BMW, a diagnostic scan tool capable of reading transmission fault codes is required. The technician will need to inspect the pressure control solenoid N, check the wiring and connectors for any damage, and ensure the transmission fluid level is adequate. Further testing may be needed to pinpoint the exact cause of the fault.
How to fix DTC P27BF on BMW
Fixing the DTC P27BF fault code on a BMW typically involves replacing the pressure control solenoid N if it is found to be faulty. Additionally, any damaged wiring or connectors should be repaired or replaced. Ensuring the transmission fluid is at the correct level and in good condition is also crucial. It is recommended to follow the manufacturer’s repair procedures for a proper fix.
How to erase DTC P27BF on BMW
Once the underlying issue causing the DTC P27BF fault code on a BMW has been addressed and fixed, the code can be cleared using a diagnostic scan tool. By clearing the code, the vehicle’s onboard computer will reset the transmission system’s adaptive values and monitor for any recurring issues.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.