BMW DTC P27C3 – Pressure Control Solenoid ‘P’ Electrical
DTC P27C3 meaning on BMW
The DTC P27C3 fault code on a BMW indicates an issue with the Pressure Control Solenoid ‘P’ electrical circuit. This fault code is specific to the transmission system and points towards a problem with the solenoid responsible for controlling hydraulic pressure within the transmission.
BMW DTC P27C3 symptoms
Symptoms of the BMW DTC P27C3 may include harsh shifting, delayed gear engagement, transmission slipping, or the transmission going into limp mode. Additionally, the vehicle’s onboard diagnostic system may illuminate the check engine light to alert the driver of a potential issue.
BMW DTC P27C3 causes
The common causes of the BMW DTC P27C3 fault code include a faulty pressure control solenoid ‘P’, damaged wiring or connectors in the solenoid circuit, low transmission fluid level, or a malfunctioning transmission control module.
BMW DTC P27C3 seriousness
Ignoring the DTC P27C3 fault code on a BMW can lead to further transmission damage and potential drivability issues. It is important to address this fault code promptly to prevent more severe transmission problems and ensure the vehicle’s continued safe operation.
How to diagnose DTC P27C3 on BMW
To diagnose the DTC P27C3 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and perform a thorough inspection of the transmission system. This may involve checking the wiring and connectors related to the pressure control solenoid ‘P’, testing the solenoid for proper operation, and verifying the transmission fluid level and condition.
How to fix DTC P27C3 on BMW
Fixing the DTC P27C3 on a BMW may involve replacing the pressure control solenoid ‘P’ if it is found to be faulty, repairing any damaged wiring or connectors in the circuit, ensuring the transmission fluid level is correct, and addressing any issues with the transmission control module. It is recommended to follow the manufacturer’s repair procedures and use genuine parts to ensure a proper fix.
How to erase DTC P27C3 on BMW
After fixing the underlying issue causing the DTC P27C3 fault code on a BMW, the code can be erased using a diagnostic scanner. By clearing the fault code, the check engine light should turn off, indicating that the issue has been resolved. It is important to verify that the fault code does not return after erasing it to ensure the repair was successful.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.