BMW DTC P2815 – Pressure Control Solenoid ‘G’ Control Circuit High
DTC P2815 meaning on BMW
DTC P2815 on a BMW indicates an issue with the Pressure Control Solenoid ‘G’ control circuit being detected as high. This means that the signal voltage from the solenoid to the engine control module (ECM) is higher than the specified range, causing a fault code to be triggered.
BMW DTC P2815 symptoms
Symptoms of DTC P2815 on a BMW may include harsh shifting, transmission slipping, poor acceleration, and in some cases, the transmission may go into limp mode. The Check Engine Light (CEL) may also illuminate on the dashboard.
BMW DTC P2815 causes
The common causes of DTC P2815 on a BMW include a faulty Pressure Control Solenoid ‘G’, damaged wiring or connectors in the solenoid circuit, low transmission fluid level, or a malfunctioning ECM.
BMW DTC P2815 seriousness
Ignoring DTC P2815 on a BMW can lead to further damage to the transmission system, potentially resulting in costly repairs. It is important to address this issue promptly to prevent any long-term damage.
How to diagnose DTC P2815 on BMW
To diagnose DTC P2815 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and perform a visual inspection of the Pressure Control Solenoid ‘G’ and its wiring. They may also conduct tests to check the solenoid’s resistance and voltage readings to pinpoint the exact cause of the issue.
How to fix DTC P2815 on BMW
Fixing DTC P2815 on a BMW may involve replacing the faulty Pressure Control Solenoid ‘G’, repairing any damaged wiring or connectors, ensuring the transmission fluid level is correct, and resetting the ECM. It is recommended to follow the manufacturer’s repair procedures or seek assistance from a professional mechanic.
How to erase DTC P2815 on BMW
To erase DTC P2815 on a BMW, a diagnostic scanner can be used to clear the fault code from the ECM’s memory. After the repair has been completed, the vehicle should be driven to ensure the issue does not reoccur, and the Check Engine Light should reset on its own if the problem has been resolved.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.