P2A58 – BMW DTC

BMW DTC P2A58 – Alternative Fuel Vaporizer ‘B’ Outlet Temperature Sensor Circuit High

DTC P2A58 meaning on BMW

DTC P2A58 on a BMW refers to the Alternative Fuel Vaporizer ‘B’ Outlet Temperature Sensor Circuit High. This diagnostic trouble code indicates that the temperature sensor circuit for the outlet of the alternative fuel vaporizer ‘B’ is reading a high voltage signal, which may be out of the specified range.

BMW DTC P2A58 symptoms

Symptoms of DTC P2A58 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Poor fuel efficiency
• Engine running rough or stalling

BMW DTC P2A58 causes

Common causes of DTC P2A58 on a BMW include:

• Faulty temperature sensor
• Wiring or connector issues in the temperature sensor circuit
• Issues with the alternative fuel vaporizer ‘B’
• Software or calibration issues

BMW DTC P2A58 seriousness

While DTC P2A58 may not always result in immediate drivability issues, it is important to address this fault to prevent potential long-term damage to the vehicle’s emissions system and ensure optimal engine performance.

How to diagnose DTC P2A58 on BMW

To diagnose DTC P2A58 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors in the temperature sensor circuit for any damage or corrosion
3. Test the temperature sensor for proper resistance values
4. Check the operation of the alternative fuel vaporizer ‘B’
5. Perform a software update or calibration if necessary

How to fix DTC P2A58 on BMW

To fix DTC P2A58 on a BMW, you can try the following:

1. Replace the faulty temperature sensor
2. Repair any damaged wiring or connectors in the circuit
3. Address any issues with the alternative fuel vaporizer ‘B’
4. Perform a software update or calibration as recommended by the manufacturer

How to erase DTC P2A58 on BMW

To erase DTC P2A58 on a BMW, you can use a diagnostic scanner to clear the fault code after the underlying issue has been resolved. Once the fault code is cleared, the Check Engine Light should turn off. It is important to ensure that the root cause of the fault has been addressed before clearing the code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.