P2A99 – BMW DTC

BMW DTC P2A99 – Alternative Fuel Tank Select Valve ‘C’ Control Circuit/Open

DTC P2A99 meaning on BMW

DTC P2A99 on a BMW refers to the Alternative Fuel Tank Select Valve ‘C’ Control Circuit/Open. This diagnostic trouble code indicates that there is an issue with the control circuit for the alternative fuel tank select valve ‘C’, specifically that it is open or not functioning properly.

BMW DTC P2A99 symptoms

Symptoms of DTC P2A99 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Difficulty starting the vehicle
• Decreased fuel efficiency

BMW DTC P2A99 causes

Common causes of DTC P2A99 on a BMW include:

• Faulty alternative fuel tank select valve ‘C’
• Open or short circuit in the control wiring
• Corrosion or poor connections in the wiring harness
• Defective engine control module (ECM)

BMW DTC P2A99 seriousness

While DTC P2A99 may not cause immediate drivability issues, it is important to address this fault promptly to prevent potential long-term damage to the vehicle’s emissions system and ensure optimal engine performance.

How to diagnose DTC P2A99 on BMW

To diagnose DTC P2A99 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM
2. Inspect the wiring harness and connectors for any visible damage or corrosion
3. Test the alternative fuel tank select valve ‘C’ for proper operation
4. Check the control circuit for continuity and proper voltage
5. If necessary, perform a pinpoint test as outlined in the vehicle’s service manual

How to fix DTC P2A99 on BMW

To fix DTC P2A99 on a BMW, you can try the following solutions:

1. Replace the faulty alternative fuel tank select valve ‘C’
2. Repair any open or short circuits in the control wiring
3. Clean or repair any corroded connectors in the wiring harness
4. If the ECM is determined to be defective, replace it with a new unit
5. Clear the fault codes and perform a test drive to ensure the issue has been resolved

How to erase DTC P2A99 on BMW

To erase DTC P2A99 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After performing the necessary repairs and confirming that the issue has been resolved, you can reset the Check Engine Light and erase the DTC P2A99 code from the system.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.