BMW DTC P3002 – Fuel Rail Pressure Flow-Rate-Controlled, Pressure Too Low
DTC P3002 meaning on BMW
DTC P3002 on a BMW indicates a fault with the fuel rail pressure flow-rate-controlled system, specifically that the pressure is too low. This fault code is triggered when the engine control module detects that the fuel pressure in the fuel rail is below the specified threshold.
BMW DTC P3002 symptoms
Symptoms of DTC P3002 on a BMW may include:
- Engine misfires
- Loss of power
- Poor fuel efficiency
- Hard starting
- Check Engine Light (MIL) illuminated
BMW DTC P3002 causes
The common causes of DTC P3002 on a BMW include:
- Fuel pump failure
- Fuel filter clogging
- Fuel pressure regulator malfunction
- Leaking fuel injectors
- Fuel pressure sensor issues
BMW DTC P3002 seriousness
Ignoring DTC P3002 on a BMW can lead to potential engine damage and poor performance. It is important to address this issue promptly to prevent further complications and ensure the proper functioning of the fuel system.
How to diagnose DTC P3002 on BMW
To diagnose DTC P3002 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Check the fuel pressure using a gauge
- Inspect the fuel pump, filter, regulator, and injectors for any signs of damage or malfunction
- Test the fuel pressure sensor for proper operation
How to fix DTC P3002 on BMW
To fix DTC P3002 on a BMW, the following steps may be taken:
- Replace the fuel pump if it is found to be faulty
- Clean or replace the fuel filter to ensure proper fuel flow
- Inspect and replace the fuel pressure regulator if necessary
- Address any leaking fuel injectors
- Replace the fuel pressure sensor if it is malfunctioning
How to erase DTC P3002 on BMW
After fixing the underlying issue causing DTC P3002 on a BMW, the fault code can be erased using a diagnostic scanner. This will clear the code from the engine control module’s memory and turn off the Check Engine Light. It is important to ensure that the repair has been successful before clearing the fault code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.