P3050 – BMW DTC

BMW DTC P3050 – Fuel Rail Pressure at Enabling Injection, Pressure Too Low (Bank 2)

DTC P3050 meaning on BMW

DTC P3050 on a BMW indicates that there is a problem with the fuel rail pressure at enabling injection, specifically on Bank 2 of the engine. This fault code is triggered when the fuel rail pressure is detected to be too low during the injection enabling process.

BMW DTC P3050 symptoms

Symptoms of DTC P3050 on a BMW may include:

  • Engine misfires
  • Loss of power
  • Poor acceleration
  • Engine stalling
  • Check Engine Light (CEL) illuminated

BMW DTC P3050 causes

Common causes of DTC P3050 on a BMW include:

  • Fuel pump failure
  • Fuel filter clogging
  • Fuel pressure regulator malfunction
  • Leaking fuel injectors
  • Fuel pressure sensor issues

BMW DTC P3050 seriousness

Ignoring DTC P3050 on a BMW can lead to potential engine damage and poor vehicle performance. It is important to address this issue promptly to prevent further complications.

How to diagnose DTC P3050 on BMW

To diagnose DTC P3050 on a BMW, you can perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes
  2. Check the fuel pressure using a gauge
  3. Inspect the fuel pump, filter, and pressure regulator for any issues
  4. Check for any fuel leaks or injector problems
  5. Test the fuel pressure sensor for proper operation

How to fix DTC P3050 on BMW

To fix DTC P3050 on a BMW, you may need to:

  1. Replace a faulty fuel pump
  2. Clean or replace a clogged fuel filter
  3. Repair or replace a malfunctioning fuel pressure regulator
  4. Address any leaking fuel injectors
  5. Replace a faulty fuel pressure sensor

How to erase DTC P3050 on BMW

To erase DTC P3050 on a BMW, you can use a diagnostic scanner to clear the fault codes after the underlying issue has been resolved. This will reset the Check Engine Light and the fault code from the vehicle’s memory.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.