P3199 – BMW DTC

BMW DTC P3199 – Engine Coolant Temperature Signal Stuck

DTC P3199 meaning on BMW

DTC P3199 on a BMW indicates that the Engine Coolant Temperature Signal is stuck. This means that the signal being sent by the engine coolant temperature sensor is not changing or is stuck at a particular value, which can lead to inaccurate temperature readings.

BMW DTC P3199 symptoms

Symptoms of DTC P3199 on a BMW may include:

  • Inaccurate temperature gauge readings
  • Engine overheating or running too cold
  • Poor fuel economy
  • Check Engine Light illuminated

BMW DTC P3199 causes

The common causes of DTC P3199 on a BMW include:

  • Faulty engine coolant temperature sensor
  • Wiring or connector issues in the coolant temperature sensor circuit
  • ECU (Engine Control Unit) malfunction

BMW DTC P3199 seriousness

DTC P3199 should not be ignored as it can lead to potential engine issues such as overheating or poor performance. It is important to address this issue promptly to prevent further damage to the engine.

How to diagnose DTC P3199 on BMW

To diagnose DTC P3199 on a BMW, you can follow these steps:

  1. Use a diagnostic scanner to retrieve the fault codes
  2. Check the engine coolant temperature sensor for proper operation
  3. Inspect the wiring and connectors for any damage or corrosion
  4. Test the ECU for any malfunctions

How to fix DTC P3199 on BMW

To fix DTC P3199 on a BMW, you can try the following solutions:

  1. Replace the faulty engine coolant temperature sensor
  2. Repair or replace any damaged wiring or connectors in the sensor circuit
  3. If the ECU is faulty, it may need to be reprogrammed or replaced

How to erase DTC P3199 on BMW

To erase DTC P3199 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECU. Once the issue has been fixed and the codes cleared, the Check Engine Light should turn off.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.