BMW DTC P323C – Barometric Pressure Sensor Comparison Current to Last Driving Cycle Correlation
DTC P323C meaning on BMW
The DTC P323C code on a BMW indicates a fault with the Barometric Pressure Sensor Comparison Current to Last Driving Cycle Correlation. This means that there is a discrepancy between the barometric pressure sensor readings from the current driving cycle compared to the previous driving cycle.
BMW DTC P323C symptoms
Symptoms of the DTC P323C code on a BMW may include:
- Check Engine Light illuminated
- Reduced engine performance
- Poor fuel efficiency
- Rough idling or stalling
BMW DTC P323C causes
Common causes of the DTC P323C code on a BMW include:
- Malfunctioning barometric pressure sensor
- Wiring or connector issues in the barometric pressure sensor circuit
- Software or calibration issues
BMW DTC P323C seriousness
The DTC P323C code should not be ignored as it can lead to poor engine performance and reduced fuel efficiency. It is recommended to address this issue promptly to prevent further damage to the vehicle.
How to diagnose DTC P323C on BMW
To diagnose the DTC P323C code on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the barometric pressure sensor and its wiring for any visible damage
- Check the sensor’s readings using a multimeter
- Perform a smoke test to check for any vacuum leaks
How to fix DTC P323C on BMW
To fix the DTC P323C code on a BMW, the following steps may be taken:
- Replace the barometric pressure sensor if it is found to be faulty
- Repair any damaged wiring or connectors in the sensor circuit
- Update the software or calibration if necessary
How to erase DTC P323C on BMW
To erase the DTC P323C code on a BMW, the fault must first be fixed. Once the issue has been addressed, a diagnostic scanner can be used to clear the fault codes and reset the Check Engine Light.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.