P3253 – BMW DTC

BMW DTC P3253 – EVAP System Purge Control Valve Circuit Open (Bank 2)

DTC P3253 meaning on BMW

DTC P3253 on a BMW indicates an issue with the EVAP (Evaporative Emission Control System) System Purge Control Valve Circuit on Bank 2. This fault code is specifically related to a circuit open condition in the purge control valve circuit of the EVAP system.

BMW DTC P3253 symptoms

Symptoms of DTC P3253 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Decreased fuel efficiency
• Strong fuel odor near the vehicle
• Issues with starting the engine

BMW DTC P3253 causes

Common causes of DTC P3253 on a BMW include:

• Faulty EVAP purge control valve
• Open or short circuit in the wiring of the purge control valve
• Corrosion or poor connections in the circuit
• ECU (Engine Control Unit) malfunction

BMW DTC P3253 seriousness

While DTC P3253 may not cause immediate drivability issues, it is important to address this fault code promptly. Ignoring this fault can lead to increased emissions, reduced fuel efficiency, and potential long-term damage to the vehicle’s emission control system.

How to diagnose DTC P3253 on BMW

To diagnose DTC P3253 on a BMW, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the EVAP purge control valve and its wiring for any visible damage or corrosion
3. Check the continuity of the wiring harness and connectors related to the purge control valve
4. Perform a smoke test to check for leaks in the EVAP system
5. Test the EVAP purge control valve for proper operation

How to fix DTC P3253 on BMW

To fix DTC P3253 on a BMW, you can consider the following actions:

1. Replace the faulty EVAP purge control valve
2. Repair or replace any damaged wiring or connectors in the circuit
3. Clean or replace the ECU connectors if necessary
4. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P3253 on BMW

To erase DTC P3253 on a BMW, you can use an OBD-II scanner to clear the fault code from the vehicle’s ECU. After fixing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and monitor the system for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.