BMW DTC P3305 – Ignition Coil Cylinder 5 Cut-Off due to Overtemperature Condition, or No Signal
DTC P3305 meaning on BMW
DTC P3305 on a BMW indicates an ignition coil cylinder 5 cut-off due to an overtemperature condition or no signal. This means that the Engine Control Module (ECM) has detected an issue with the ignition coil in cylinder 5, either due to overheating or a lack of signal.
BMW DTC P3305 symptoms
Symptoms of DTC P3305 on a BMW may include engine misfires, rough idling, loss of power, and potentially an illuminated Check Engine Light on the dashboard. The vehicle may also experience poor fuel efficiency and overall performance.
BMW DTC P3305 causes
The causes of DTC P3305 on a BMW can vary, but common reasons include a faulty ignition coil in cylinder 5, wiring issues, a poor electrical connection, or overheating of the ignition coil. Environmental factors such as extreme heat can also contribute to this issue.
BMW DTC P3305 seriousness
Ignoring DTC P3305 on a BMW can lead to further engine damage, reduced fuel efficiency, and potential drivability issues. It is important to address this issue promptly to prevent more severe problems down the line.
How to diagnose DTC P3305 on BMW
To diagnose DTC P3305 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault codes stored in the ECM. They would then inspect the ignition coil in cylinder 5, check for any wiring or connection issues, and perform tests to determine the root cause of the problem.
How to fix DTC P3305 on BMW
Fixing DTC P3305 on a BMW may involve replacing the faulty ignition coil in cylinder 5, repairing any damaged wiring or connections, and addressing any overheating issues. It is recommended to use genuine BMW parts and follow the manufacturer’s guidelines for proper repair.
How to erase DTC P3305 on BMW
Once the underlying issue causing DTC P3305 on a BMW has been resolved, the fault codes can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the vehicle to operate normally. It is important to ensure that the repair has been successful before clearing the fault codes.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.