BMW DTC P3317 – Ignition Coil Cylinder 3 Cut-Off due to Overtemperature Condition, or No Signal
DTC P3317 meaning on BMW
DTC P3317 on a BMW indicates an ignition coil cylinder 3 cut-off due to an overtemperature condition or no signal. This means that the Engine Control Module (ECM) has detected an issue with the ignition coil in cylinder 3, either due to overheating or a lack of signal.
BMW DTC P3317 symptoms
Symptoms of BMW DTC P3317 may include engine misfires, rough idling, loss of power, and potentially an illuminated Check Engine Light on the dashboard. The vehicle may also experience poor fuel efficiency and overall performance.
BMW DTC P3317 causes
The causes of BMW DTC P3317 can vary, but common reasons include a faulty ignition coil in cylinder 3, wiring issues, or a problem with the Engine Control Module (ECM). Overheating of the ignition coil can also trigger this fault code.
BMW DTC P3317 seriousness
Ignoring BMW DTC P3317 can lead to further engine damage, reduced fuel efficiency, and potential drivability issues. It is important to address this fault code promptly to prevent any long-term damage to the vehicle.
How to diagnose DTC P3317 on BMW
To diagnose BMW DTC P3317, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and perform a visual inspection of the ignition coil in cylinder 3 and its wiring. They may also test the ignition coil for proper function and check for any signs of overheating.
How to fix DTC P3317 on BMW
Fixing BMW DTC P3317 usually involves replacing the faulty ignition coil in cylinder 3, addressing any wiring issues, or repairing the Engine Control Module if necessary. It is important to use genuine BMW parts and follow proper repair procedures to ensure a lasting solution.
How to erase DTC P3317 on BMW
To erase DTC P3317 on a BMW, a mechanic can use a diagnostic scanner to clear the fault code from the ECM’s memory. Once the underlying issue has been fixed, the fault code can be cleared, and the Check Engine Light should turn off. It is important to verify that the issue has been resolved before clearing the fault code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.