P3406 – BMW DTC

BMW DTC P3406 – Cylinder 1 Exhaust Valve Control Circuit Performance

DTC P3406 meaning on BMW

DTC P3406 on a BMW indicates a performance issue with the exhaust valve control circuit for cylinder 1. This fault code is specific to the exhaust valve control system and is triggered when the Engine Control Module (ECM) detects that the performance of the circuit is outside the expected parameters.

BMW DTC P3406 symptoms

Symptoms of DTC P3406 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance or power
• In some cases, the vehicle may go into a limp mode

BMW DTC P3406 causes

The common causes of DTC P3406 on a BMW include:

• Faulty exhaust valve control solenoid
• Wiring issues in the exhaust valve control circuit
• ECM software or hardware issues
• Mechanical problems with the exhaust valve itself

BMW DTC P3406 seriousness

DTC P3406 should not be ignored as it can lead to poor engine performance and potential damage if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P3406 on BMW

To diagnose DTC P3406 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and any related codes
2. Inspect the exhaust valve control solenoid and wiring for any visible damage
3. Test the exhaust valve control circuit for proper voltage and continuity
4. Check the ECM for any software updates or malfunctions

How to fix DTC P3406 on BMW

To fix DTC P3406 on a BMW, the following steps may be taken:

1. Replace the faulty exhaust valve control solenoid if necessary
2. Repair any damaged wiring in the exhaust valve control circuit
3. Update the ECM software to the latest version
4. If mechanical issues are found, repair or replace the affected components

How to erase DTC P3406 on BMW

To erase DTC P3406 on a BMW, the fault code can be cleared using a diagnostic scanner. After addressing the underlying issue causing the fault code, the ECM can be reset to clear the code and turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.