BMW DTC P3407 – Cylinder 1 Exhaust Valve Control Circuit Low
DTC P3407 meaning on BMW
The Diagnostic Trouble Code (DTC) P3407 for BMW indicates an issue with the Cylinder 1 Exhaust Valve Control Circuit being detected as low. This means that there is a problem with the electrical circuit that controls the exhaust valve in cylinder 1 of the engine.
BMW DTC P3407 symptoms
Symptoms of DTC P3407 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance
- In some cases, the vehicle may go into a limp mode
BMW DTC P3407 causes
The common causes of DTC P3407 on a BMW include:
- Faulty exhaust valve control solenoid
- Wiring issues in the exhaust valve control circuit
- ECU (Engine Control Unit) malfunction
- Mechanical issues with the exhaust valve itself
BMW DTC P3407 seriousness
Ignoring DTC P3407 on a BMW can lead to potential engine damage and reduced fuel efficiency. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P3407 on BMW
To diagnose DTC P3407 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the wiring and connectors in the exhaust valve control circuit
- Test the exhaust valve control solenoid for proper operation
- Check the ECU for any faults or malfunctions
How to fix DTC P3407 on BMW
To fix DTC P3407 on a BMW, the following steps may be taken:
- Replace the faulty exhaust valve control solenoid
- Repair any damaged wiring or connectors in the circuit
- If the ECU is faulty, it may need to be reprogrammed or replaced
- In some cases, mechanical issues with the exhaust valve may require repair or replacement
How to erase DTC P3407 on BMW
After the issue causing DTC P3407 on a BMW has been fixed, the fault codes can be erased using a diagnostic scanner. This will clear the Check Engine Light and reset the system for normal operation.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.