P3409 – BMW DTC

BMW DTC P3409 – Cylinder 2 Deactivation/Intake Valve Control Circuit/Open

DTC P3409 meaning on BMW

The Diagnostic Trouble Code (DTC) P3409 for BMW indicates an issue with the Cylinder 2 Deactivation/Intake Valve Control Circuit being open. This means that there is a malfunction in the circuit responsible for controlling the deactivation of cylinder 2 or the intake valve in the engine.

BMW DTC P3409 symptoms

Symptoms of DTC P3409 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance or power
• In some cases, the vehicle may go into a reduced power mode

BMW DTC P3409 causes

The common causes of DTC P3409 on a BMW include:

• Faulty wiring or connectors in the Cylinder 2 Deactivation/Intake Valve Control Circuit
• Defective Cylinder 2 Deactivation Solenoid
• Issues with the intake valve control module
• Engine mechanical problems affecting cylinder 2

BMW DTC P3409 seriousness

Ignoring DTC P3409 on a BMW can lead to potential engine performance issues and may cause further damage if left unresolved. It is recommended to address this code promptly to prevent any long-term problems with the engine.

How to diagnose DTC P3409 on BMW

To diagnose DTC P3409 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors in the Cylinder 2 Deactivation/Intake Valve Control Circuit for any damage or loose connections
3. Test the Cylinder 2 Deactivation Solenoid and intake valve control module for proper operation
4. Check for any engine mechanical issues affecting cylinder 2

How to fix DTC P3409 on BMW

To fix DTC P3409 on a BMW, the following steps may be taken:

1. Repair or replace any damaged wiring or connectors in the Cylinder 2 Deactivation/Intake Valve Control Circuit
2. Replace the faulty Cylinder 2 Deactivation Solenoid if necessary
3. Address any issues with the intake valve control module
4. Resolve any engine mechanical problems affecting cylinder 2

How to erase DTC P3409 on BMW

After fixing the underlying issue causing DTC P3409 on a BMW, the fault code can be erased using a diagnostic scanner. This will clear the code from the vehicle’s memory and turn off the Check Engine Light. It is important to ensure that the repair has been successful before clearing the code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.