BMW DTC P3419 – Cylinder 3 Deactivation/Intake Valve Control Circuit Low
DTC P3419 meaning on BMW
The Diagnostic Trouble Code (DTC) P3419 for BMW indicates an issue with the Cylinder 3 Deactivation/Intake Valve Control Circuit being detected as low. This means that there is a problem with the electrical circuit responsible for controlling the deactivation or activation of the intake valve in cylinder 3 of the engine.
BMW DTC P3419 symptoms
Symptoms associated with DTC P3419 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance or power
- In some cases, the vehicle may go into a reduced power mode
BMW DTC P3419 causes
The common causes of DTC P3419 on a BMW include:
- Faulty intake valve control solenoid
- Wiring issues in the intake valve control circuit
- Poor electrical connections
- Defective Engine Control Module (ECM)
BMW DTC P3419 seriousness
Ignoring DTC P3419 on a BMW can lead to potential engine performance issues and may cause further damage if left unresolved. It is recommended to address this issue promptly to prevent any long-term problems.
How to diagnose DTC P3419 on BMW
To diagnose DTC P3419 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and related data
- Inspect the intake valve control solenoid and wiring for any visible damage
- Check the electrical connections and ensure they are secure
- Perform a circuit test to check for continuity and proper voltage
- If necessary, test the Engine Control Module (ECM) for functionality
How to fix DTC P3419 on BMW
To fix DTC P3419 on a BMW, the following steps may be taken:
- Replace the faulty intake valve control solenoid if found defective
- Repair or replace any damaged wiring in the intake valve control circuit
- Ensure all electrical connections are properly secured and free of corrosion
- If the ECM is determined to be faulty, it may need to be replaced or reprogrammed
How to erase DTC P3419 on BMW
After the issue causing DTC P3419 on a BMW has been resolved, the fault code can be erased using a diagnostic scanner. This will clear the code from the Engine Control Module’s memory and turn off the Check Engine Light. It is important to ensure that the underlying problem has been fixed before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.