P3437 – BMW DTC

BMW DTC P3437 – Cylinder 5 Exhaust Valve Control Circuit/Open

DTC P3437 meaning on BMW

DTC P3437 on a BMW indicates a fault with the Cylinder 5 Exhaust Valve Control Circuit, specifically an open circuit. This means that the Engine Control Module (ECM) has detected a lack of continuity or a break in the electrical circuit that controls the exhaust valve for cylinder 5.

BMW DTC P3437 symptoms

Symptoms of DTC P3437 on a BMW may include:

• Check Engine Light illuminated
• Engine running rough or misfiring
• Reduced engine performance
• In some cases, there may be no noticeable symptoms

BMW DTC P3437 causes

The possible causes of DTC P3437 on a BMW include:

• Faulty exhaust valve control solenoid
• Open or short circuit in the wiring harness
• Faulty Engine Control Module (ECM)
• Mechanical issue with the exhaust valve itself

BMW DTC P3437 seriousness

DTC P3437 should be addressed promptly as it can lead to poor engine performance and potentially cause damage to other components if left unresolved. Ignoring this fault may result in increased fuel consumption, emissions, and potential engine damage.

How to diagnose DTC P3437 on BMW

To diagnose DTC P3437 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the wiring harness for any visible damage or breaks
3. Test the exhaust valve control solenoid for proper operation
4. Check the ECM for any stored codes or malfunctions
5. Perform a thorough visual inspection of the exhaust valve and related components

How to fix DTC P3437 on BMW

To fix DTC P3437 on a BMW, the following steps may be taken:

1. Repair or replace any damaged wiring in the exhaust valve control circuit
2. Replace the faulty exhaust valve control solenoid if necessary
3. If the ECM is determined to be faulty, it may need to be reprogrammed or replaced
4. Ensure proper functioning of the exhaust valve and related components

How to erase DTC P3437 on BMW

After the issue causing DTC P3437 on a BMW has been resolved, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the DTC from the ECM’s memory. It is important to verify that the repair was successful by driving the vehicle and rescanning for any remaining fault codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.