P3441 – BMW DTC

BMW DTC P3441 – Cylinder 6 Deactivation/Intake Valve Control Circuit/Open

DTC P3441 meaning on BMW

The Diagnostic Trouble Code (DTC) P3441 for BMW indicates an issue with the Cylinder 6 Deactivation/Intake Valve Control Circuit being open. This means that there is a malfunction in the circuit that controls the deactivation of cylinder 6 or the intake valve in the engine.

BMW DTC P3441 symptoms

Symptoms of DTC P3441 on a BMW may include:

  • Check Engine Light illuminated
  • Engine running rough or misfiring
  • Reduced engine performance
  • Increased fuel consumption

BMW DTC P3441 causes

Common causes of DTC P3441 on a BMW include:

  • Faulty intake valve control solenoid
  • Open or short circuit in the wiring related to cylinder 6 deactivation
  • Faulty engine control module (ECM)

BMW DTC P3441 seriousness

DTC P3441 should not be ignored as it can lead to poor engine performance and potential damage if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P3441 on BMW

To diagnose DTC P3441 on a BMW, you can follow these steps:

  1. Use a diagnostic scanner to retrieve the fault codes
  2. Inspect the wiring and connectors related to the intake valve control circuit
  3. Test the intake valve control solenoid for proper operation
  4. Check the ECM for any faults or errors

How to fix DTC P3441 on BMW

To fix DTC P3441 on a BMW, you can try the following:

  1. Replace the faulty intake valve control solenoid
  2. Repair any open or short circuits in the wiring
  3. If the ECM is faulty, consider replacing or reprogramming it

How to erase DTC P3441 on BMW

To erase DTC P3441 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. Once the issue has been addressed and fixed, you can reset the codes to turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.