P3447 – BMW DTC

BMW DTC P3447 – Cylinder 6 Exhaust Valve Control Circuit Low

DTC P3447 meaning on BMW

The Diagnostic Trouble Code (DTC) P3447 for BMW indicates a low voltage condition in the exhaust valve control circuit of cylinder 6. This code is specific to BMW vehicles and is related to the variable valve timing system.

BMW DTC P3447 symptoms

Symptoms of DTC P3447 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance or power
• Engine misfires or rough idling
• Increased fuel consumption

BMW DTC P3447 causes

The low voltage condition in the exhaust valve control circuit of cylinder 6 that triggers DTC P3447 on a BMW can be caused by various factors, including:

• Faulty exhaust valve control solenoid
• Wiring issues or poor connections in the circuit
• ECU (Engine Control Unit) software or hardware problems
• Mechanical issues with the exhaust valve itself

BMW DTC P3447 seriousness

While DTC P3447 may not always result in immediate drivability issues, it is important to address this fault promptly. Ignoring this code can lead to further engine problems, reduced fuel efficiency, and potential damage to engine components over time.

How to diagnose DTC P3447 on BMW

To diagnose DTC P3447 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the exhaust valve control solenoid and wiring for any visible damage or corrosion
3. Test the solenoid and circuit for proper voltage and continuity
4. Check for any mechanical issues with the exhaust valve
5. Verify the ECU software is up to date

How to fix DTC P3447 on BMW

Fixing DTC P3447 on a BMW typically involves the following steps:

1. Replace the faulty exhaust valve control solenoid if necessary
2. Repair any damaged wiring or connections in the circuit
3. Address any mechanical issues with the exhaust valve
4. Update the ECU software to the latest version

How to erase DTC P3447 on BMW

After fixing the underlying issue causing DTC P3447 on a BMW, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the code from the ECU’s memory. It is important to ensure that the repair has been successful before clearing the code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.