P3458 – BMW DTC

BMW DTC P3458 – Cylinder 8 Deactivation/Intake Valve Control Circuit Performance

DTC P3458 meaning on BMW

DTC P3458 indicates a malfunction in the Cylinder 8 Deactivation/Intake Valve Control Circuit on a BMW vehicle. This fault code is specific to the performance of the intake valve control circuit for cylinder 8.

BMW DTC P3458 symptoms

Symptoms of DTC P3458 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance or power
• In some cases, the vehicle may go into a reduced power mode

BMW DTC P3458 causes

The common causes of DTC P3458 on a BMW include:

• Faulty intake valve control solenoid
• Wiring issues in the intake valve control circuit
• ECU (Engine Control Unit) software or hardware problems
• Mechanical issues with the intake valve itself

BMW DTC P3458 seriousness

DTC P3458 should be addressed promptly as it can lead to engine performance issues and potential damage if left unresolved. Ignoring this fault code may result in further complications and increased repair costs.

How to diagnose DTC P3458 on BMW

To diagnose DTC P3458 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and any related codes
2. Inspect the intake valve control solenoid and wiring for any visible damage or corrosion
3. Perform a visual inspection of the intake valve and associated components
4. Check the ECU for any stored codes or issues related to the intake valve control circuit

How to fix DTC P3458 on BMW

To fix DTC P3458 on a BMW, consider the following actions:

1. Replace the faulty intake valve control solenoid if necessary
2. Repair any damaged wiring in the intake valve control circuit
3. Address any mechanical issues with the intake valve itself
4. If ECU-related problems are detected, consult a professional for further diagnosis and repair

How to erase DTC P3458 on BMW

To erase DTC P3458 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault code after the underlying issue has been resolved
2. Ensure that the repair has been completed successfully before clearing the code
3. Perform a test drive to confirm that the Check Engine Light does not reappear

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.