BMW DTC P3476 – Cylinder 10 Deactivation/Intake Valve Control Circuit High
DTC P3476 meaning on BMW
The Diagnostic Trouble Code (DTC) P3476 for BMW indicates an issue with the Cylinder 10 Deactivation/Intake Valve Control Circuit being detected as high. This means that there is a problem with the electrical circuit controlling the deactivation or intake valve for cylinder 10 in the engine.
BMW DTC P3476 symptoms
Symptoms of DTC P3476 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance or power
- In some cases, the vehicle may go into a reduced power mode
BMW DTC P3476 causes
Common causes of DTC P3476 on a BMW include:
- Faulty deactivation/intake valve control solenoid
- Wiring or connector issues in the control circuit
- Engine control module (ECM) software or hardware problems
- Mechanical issues with the deactivation/intake valve itself
BMW DTC P3476 seriousness
The seriousness of DTC P3476 on a BMW depends on the underlying cause. Ignoring this fault can lead to further engine performance issues and potential damage if left unresolved. It is recommended to address this DTC promptly to prevent any long-term problems.
How to diagnose DTC P3476 on BMW
To diagnose DTC P3476 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and related data
- Inspect the wiring and connectors in the deactivation/intake valve control circuit
- Test the deactivation/intake valve control solenoid for proper operation
- Check for any mechanical issues with the deactivation/intake valve
- Verify the ECM software for any updates or reprogramming needed
How to fix DTC P3476 on BMW
To fix DTC P3476 on a BMW, the following steps may be taken:
- Replace the faulty deactivation/intake valve control solenoid
- Repair any wiring or connector issues in the control circuit
- Address any mechanical problems with the deactivation/intake valve
- Update or reprogram the ECM software as necessary
How to erase DTC P3476 on BMW
To erase DTC P3476 on a BMW, the fault code can be cleared using a diagnostic scanner. After the underlying issue has been fixed, the code can be cleared to reset the Check Engine Light. It is important to ensure that the problem causing the fault code has been resolved before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.