U0019 – BMW DTC

BMW DTC U0019 – Low Speed CAN Communication Bus

DTC U0019 meaning on BMW

DTC U0019 on a BMW refers to a Low Speed Controller Area Network (CAN) communication bus issue. The Low Speed CAN bus is a network that allows various control modules within the vehicle to communicate with each other at a lower speed compared to the High Speed CAN bus. When this DTC is triggered, it indicates a problem with the communication between modules on the Low Speed CAN bus.

BMW DTC U0019 symptoms

Symptoms of DTC U0019 on a BMW may include:

• Malfunction indicator light (MIL) or check engine light illuminated on the dashboard
• Loss of communication with certain vehicle systems
• Erratic behavior of electronic components
• Vehicle may go into limp mode

BMW DTC U0019 causes

Common causes of DTC U0019 on a BMW include:

• Faulty control module
• Wiring or connection issues in the Low Speed CAN bus network
• Interference from other electronic components
• Software glitches or programming errors

BMW DTC U0019 seriousness

The seriousness of DTC U0019 on a BMW can vary depending on the underlying cause. Ignoring this issue can lead to further communication problems between vehicle systems, potentially affecting the overall performance and safety of the vehicle. It is recommended to address this DTC promptly to prevent any potential issues.

How to diagnose DTC U0019 on BMW

To diagnose DTC U0019 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and identify the specific module reporting the issue
2. Inspect the wiring and connections in the Low Speed CAN bus network for any visible damage or loose connections
3. Check for any software updates or reprogramming needed for the control modules
4. Perform a network communication test to identify the source of the communication failure

How to fix DTC U0019 on BMW

Fixing DTC U0019 on a BMW may involve the following steps:

1. Repair or replace any damaged wiring or connections in the Low Speed CAN bus network
2. Address any issues with the control modules by repairing or replacing faulty components
3. Update software or reprogram control modules as needed
4. Clear the fault codes and perform a test drive to ensure the issue has been resolved

How to erase DTC U0019 on BMW

To erase DTC U0019 on a BMW, a mechanic can use a diagnostic scanner to clear the fault codes stored in the vehicle’s system. After addressing the underlying issue causing the DTC, the mechanic can then reset the codes and verify that the problem has been resolved. It is important to ensure that the root cause of the DTC has been fixed before clearing the fault codes to prevent the issue from recurring.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.