U0063 – BMW DTC

BMW DTC U0063 – Vehicle Communication Bus D (-) shorted to Bus D (+)

DTC U0063 meaning on BMW

DTC U0063 on a BMW indicates that there is a short circuit between the Vehicle Communication Bus D (-) and Bus D (+). This fault is related to the communication network within the vehicle, which can affect various electronic control modules and systems.

BMW DTC U0063 symptoms

Symptoms of DTC U0063 on a BMW may include:

• Malfunction indicator light (MIL) illuminated on the dashboard
• Communication errors with various vehicle systems
• Loss of communication with diagnostic tools
• Erratic behavior of electronic components

BMW DTC U0063 causes

The possible causes of DTC U0063 on a BMW include:

• Short circuit between Bus D (-) and Bus D (+)
• Faulty wiring or connectors in the communication network
• Defective electronic control module (ECM)
• Water or corrosion damage to the communication bus components

BMW DTC U0063 seriousness

DTC U0063 should be addressed promptly as it can lead to communication issues between critical vehicle systems. Ignoring this fault may result in malfunctions of various electronic components, affecting the overall performance and safety of the vehicle.

How to diagnose DTC U0063 on BMW

To diagnose DTC U0063 on a BMW, follow these steps:

1. Use a diagnostic scan tool to retrieve the fault codes from the vehicle’s ECM.
2. Inspect the wiring and connectors related to the Bus D communication network for any visible damage or corrosion.
3. Perform a continuity test to check for a short circuit between Bus D (-) and Bus D (+).
4. Check the ECM and other control modules for any signs of water damage or malfunction.

How to fix DTC U0063 on BMW

To fix DTC U0063 on a BMW, consider the following steps:

1. Repair any damaged or corroded wiring and connectors in the Bus D communication network.
2. Replace any faulty electronic control modules that may be causing the short circuit.
3. Clean and dry any components affected by water or corrosion damage.
4. Clear the fault codes using a diagnostic scan tool after completing the repairs.

How to erase DTC U0063 on BMW

To erase DTC U0063 on a BMW, follow these steps:

1. Connect a diagnostic scan tool to the vehicle’s OBD-II port.
2. Select the option to clear fault codes from the ECM.
3. Follow the on-screen prompts to erase the DTC U0063 code.
4. Ensure that the repairs have been completed before clearing the fault code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.