U013D – BMW DTC

BMW DTC U013D – Lost Communication With Vacuum Sensor ‘A’

DTC U013D meaning on BMW

DTC U013D on a BMW indicates a communication error with the vacuum sensor ‘A’. This fault code is specific to the vehicle’s network system, signaling a loss of communication between the control module and the vacuum sensor ‘A’.

BMW DTC U013D symptoms

Symptoms of DTC U013D on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Issues with the vehicle’s idle speed
• Possible stalling or rough idling

BMW DTC U013D causes

The potential causes of DTC U013D on a BMW include:

• Defective vacuum sensor ‘A’
• Wiring or connection issues between the sensor and the control module
• Faulty control module
• Interference from other electronic components

BMW DTC U013D seriousness

While DTC U013D may not always result in immediate drivability issues, it is essential to address this fault code promptly. Ignoring communication errors between critical components like the vacuum sensor ‘A’ and the control module can lead to potential performance issues and further damage to the vehicle over time.

How to diagnose DTC U013D on BMW

To diagnose DTC U013D on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the vacuum sensor ‘A’ and its wiring for any visible damage or loose connections
3. Check for any other stored fault codes that may provide additional context
4. Perform a communication test between the sensor and the control module

How to fix DTC U013D on BMW

To fix DTC U013D on a BMW, consider the following actions:

1. Replace the faulty vacuum sensor ‘A’ if it is determined to be defective
2. Repair or replace any damaged wiring or connectors associated with the sensor
3. If the control module is faulty, it may need to be reprogrammed or replaced
4. Clear the fault code and perform a test drive to ensure the issue has been resolved

How to erase DTC U013D on BMW

To erase DTC U013D on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s onboard computer system
2. Select the option to clear or erase fault codes
3. Confirm the action and wait for the scanner to complete the process
4. Turn off the ignition, then restart the vehicle to ensure the fault code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.